Browse all practice questions for the Conduct Ground Maintenance Operations at the Company Level Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Conduct Ground Maintenance Operations at the Company Level Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What information should maintenance control track for equipment sent to another maintenance activity?
  • After an unsafe condition is found, when may equipment be returned to service?
  • How does good housekeeping support maintenance operations?
  • A maintenance priority system is being applied inconsistently by different sections. What should leaders emphasize to improve its use?
  • What information should an operator include when reporting a fault that occurs during a mission?
  • Which symbol denotes a deadline on PMCS documentation?
  • Which combination of information is most useful in a company maintenance status report to the commander?
  • What does the code -10 TM refer to?
  • Preventive Maintenance Checks & Services (PMCS) are defined as:
  • Which practice is essential before working beneath raised equipment?
  • PMCS stands for
  • An operational change alters which equipment is most important to the mission. What should the company do with its maintenance priorities?
  • Which action is associated with the Commander on the DA 5988-E?
  • Which section lists maintenance faults on the DA Form 5988-E?
  • According to the material, which person is responsible for documenting limited operations entries on the DA 5988-E?
  • BII stands for which of the following?
  • Where is the start level of sustainment maintenance located?
  • Why should a parts request be based on a confirmed diagnosis whenever possible?
  • What items are needed when performing a PMCS?
  • What are the four primary logistic support operations of a Brigade Support Battalion?
  • When should a post-maintenance operational test be performed?
  • A maintenance task may be deferred to complete an urgent repair. Which consideration best supports an informed decision?
  • BDAR stands for?
  • Which system is noted as providing health services support within the brigade's logistics framework?
  • When documenting an operator’s equipment complaint, what should the supervisor ensure?
  • Why should an operator report mission-related equipment symptoms promptly through established channels?
  • When urgent mission repairs compete with scheduled preventive maintenance, which action best supports a deliberate decision?
  • Which program is included in SOP key areas related to oil analysis?
  • Can specialized equipment be added to a license automatically?
  • The Equipment Status Report includes which of the following per UIC?
  • Which symbol indicates a shortcoming or fault?
  • Which statement best describes GCSS-Army?
  • Which symbol indicates a conditional operation of a deadline vehicle?
  • Before equipment is released to its user, which condition must be met?
  • Which licensing evaluation step cannot be delegated?
  • How does operator-level preventive maintenance contribute to company readiness?
  • What distinguishes a maintenance deadline from an ordinary repair?
  • Which of the following is NOT a reason PMCS are conducted?
  • Which form is used to record maintenance faults and service due data for equipment?
  • Who is responsible for PMCS?
  • During a maintenance meeting, supply staff report that a critical part is unavailable. What is the most appropriate outcome of the meeting?
  • A repair requires a technical skill that no one in the company is qualified to perform. What should the supervisor do?
  • What should a supervisor consider when assigning a maintenance task?
  • What should a maintenance unit do when preparing to recover disabled equipment?
  • On a maintenance fault line, who initials lines for faults that have been corrected?
  • Why is it important to distinguish equipment that is fully mission capable from equipment that has limitations?
  • A repair is delayed because the required part is unavailable. What should maintenance control do?
  • Which of the following is NOT a documented duty on the 5988-E based on the material?
  • Depot maintenance is a distinct sub-set of which level of maintenance?
  • Before accepting equipment for maintenance, what should a supervisor verify?
  • BII/COEI refers to what?
  • Which item is listed as part of GCSS-A Maintenance Reports?
  • Fully Mission Capable means what?
  • Which system records all MWOs and SOUMs?
  • An operator’s fault report is unclear. What should the maintenance supervisor do?
  • Two-level maintenance actions at field level are characterized by which features?
  • Several jobs are delayed because they require the same specialized workstation. What should the leader do to assess this constraint?
  • After scheduled maintenance is deferred because of an urgent repair, what is the best follow-up?
  • PMCS stands for?
  • What is the primary purpose of accurately closing out a maintenance work order?
  • Which item is NOT one of the six ground maintenance factors (CSM-MTR)?
  • Under fault identification categories, which phrase encapsulates malfunctions?
  • At the company level, which responsibility belongs primarily to maintenance control?
  • How should hazardous waste generated during maintenance be managed?
  • A scheduled maintenance task must be delayed to address an urgent mission repair. What requirements should still be preserved?
  • Which statement best describes field maintenance?
  • A technician discovers that the replacement part used differs from the part originally expected. What should the maintenance record reflect?
  • Approximately how many local supply and logistics databases were integrated into GCSS-A?
  • Which information should be included in a complete maintenance record for a repaired piece of equipment?
  • Which statement best describes the Brigade Support Battalion's role within a Brigade Combat Team?
  • Who is responsible for establishing and maintaining a maintenance SOP?
  • A work request has been reviewed, but its progress and constraints are not being tracked. Which responsibility is being neglected?
  • A company has accurate maintenance records, but personnel do not know how to use its priority system. Which improvement is most directly needed?
  • A repair is complete, but a known limitation remains. What should be done before release?
  • Which document is used to annotate all deficiencies and shortcomings found during inspection?
  • Which role is associated with faults that have been corrected?
  • A company lacks the capability to complete a repair. Which action is consistent with responsible maintenance control?
  • Which abbreviation corresponds to MMIS?
  • Which item is a prerequisite for licensing?
  • After a maintenance-related injury or near miss, what should a supervisor do?
  • What is the primary purpose of a shop safety inspection?
  • CMDP purpose: which statement is accurate about its objectives?
  • A company wants maintenance priorities to support its operational purpose. What should guide the priority system?
  • Why must test equipment be calibrated and maintained as required?
  • Which is a valid ground maintenance factor among CSM-MTR?
  • A company is establishing a system for prioritizing maintenance work. Which approach is most likely to make the system effective?
  • What is a likely consequence of using an out-of-calibration test instrument?
  • Which statement BEST describes the DA 5988-E?
  • Before a maintenance area is cleared, what should the maintenance leader ensure regarding tools?
  • What is the CMDP?
  • A worker narrowly avoids injury during maintenance, with no equipment damage. What should the supervisor do?
  • When no DA Form 5988-E is available or no faults are found, what should be shown?
  • Who handles or modifies fault data within GCSS-A?
  • What is the purpose of a Basic Issue Items (BII) inventory?
  • What is listed as a benefit of the two-level maintenance system regarding readiness and logistics?
  • What does NMC stand for?
  • What is an example of a typical replace task at field level maintenance?
  • What ensures that all vehicles and equipment receive thorough weekly inspection?
  • A leader discovers that a required service is overdue. What is the most appropriate response?
  • What is a key feature of GCSS-Army as described in the material?
  • Which form corresponds to the Equipment Maintenance and Inspection Worksheet used in equipment maintenance documentation?
  • Which document carries detailed maintenance information for annotation of deficiencies?
  • Which acronym is associated with general maintenance messages?
  • Why must a controlled exchange preserve accountability and maintenance records?
  • Which description best defines a Field Maintenance Company?
  • DA 5884-E is used for which purpose?
  • Which statement best describes how a workload forecast should be used by maintenance leaders?
  • Which information is especially important for leaders to use when assigning maintenance priorities?
  • Two-level maintenance actions at sustainment level are characterized by which features?
  • What are the two categories of non-mission capable (NMC) status?
  • Who needs a military license for Army equipment?
  • Which set of actions best describes the content of a prescribed scheduled service?
  • A commander needs to decide how to restore readiness. Which report detail is especially important when open repairs are delayed?
  • What is the primary purpose of a maintenance workload forecast?
  • GCSS-A tracks which items and activities?
  • In NMC supply, what is the status of the part?
  • The acronym MWO stands for?
  • Why should recovery operations be coordinated with maintenance control?
  • Which statement describes health services support within the Brigade Support Battalion?
  • What is one of the tasks operators perform?
  • A unit experiences repeated failures of the same equipment component. How can its maintenance leader best use this pattern to improve the maintenance program?
  • What should a supervisor do after discovering that equipment is unsafe to operate?
  • In the GCSS-A Equipment Status Report, what is the lowest UIC (unit identification code) level?
  • Who initials the limited operations entries on the DA 5988-E?
  • What is the purpose of dispatch procedures in field maintenance operations?
  • Which steps are included in the licensing evaluation process?
  • When a recurring fault appears to exceed the company’s local maintenance capability, what should the unit do?
  • What is the operator’s role in PMCS according to Army maintenance?
  • Why should a company maintain accurate information about equipment and work status when prioritizing maintenance?
  • A reported symptom disappears during inspection, and the available evidence does not confirm a repair. Which action best preserves accurate maintenance records?
  • What is the role of the Forward Support Company?
  • What capabilities does the Field Maintenance Company provide?
  • PMCS helps determine FMC vs NMC.
  • What must a license be stamped with to designate installation-only use?
  • MWO stands for what?
  • What is the purpose of fault diagnosis?
  • Why should maintenance personnel verify that a technical publication is current and applies to the equipment being serviced?
  • Which statement is true about the purpose of the DA 5988-E?
  • Fault diagnosis involves which of the following?
  • The Equipment Status Report provides fault details such as fault description, fault found date, NMCM/NMCS, part order description, and which of the following?
  • A company must choose between an urgent mission repair and scheduled preventive work. Which decision process is most appropriate?
  • What is the value of assessing risk before a difficult or hazardous repair?
  • What is a key purpose of a technical inspection before maintenance begins?
  • Which function does the Brigade Support Battalion provide for the BCT related to transportation?
  • Which practice best prevents deferred preventive maintenance from being overlooked after urgent work is completed?
  • A maintenance control section receives work requests and keeps leaders informed. Which activity is also part of its role in managing shop workload?
  • Can commanders still approve a vehicle for dispatch if there are still faults that need to be corrected?
  • In maintenance terminology, a fault is defined as
  • When several work orders compete for limited shop resources, what should guide the team’s prioritization?
  • Which of the following is a key area to address in the maintenance SOP?
  • Which outcome is most directly supported by maintaining an orderly, clean work area?
  • Which topic outlines the standards for equipment readiness used in Army doctrine?
  • What is the primary purpose of a company-level maintenance SOP?
  • In maintenance terminology, a shortcoming is best described as?
  • Which system is used to keep track of vehicle maintenance for parts, faults, and equipment status?
  • A fault returns shortly after a repair. What is the most appropriate response?
  • Which regulation establishes standards for licensing operators of Army wheeled and tracked vehicles?
  • Which pair correctly describes the two categories of the Army maintenance system?
  • Which statement best describes Forward Support Company?
  • A company’s mission or equipment changes. How should its maintenance SOP be updated?
  • A replacement material appears to meet the task’s needs. What must the team establish before using it?
  • In NMC maintenance, where is the part located?
  • Before using a substitute part, what should a maintenance team do?
  • A mechanic cannot reproduce a fault reported by an operator. What is the best way to document and follow up on the issue?
  • What does FMC stand for in maintenance readiness?
  • Which unit is organic to the division sustainment support battalion and may be attached to either a combat sustainment support battalion, or a Sustainment brigade based on workload?
  • Which section of the DA Form 5988-E records service due data?
  • What is the primary focus of production control in a company maintenance operation?
  • Which function is a primary responsibility of the Brigade Support Battalion for the BCT?
  • Do you need to put your name on the DA 5988-E?
  • A shop has more open repair work than its available qualified staff can complete during operating hours. What should a leader examine to identify the source of the overload?
  • Why is accurate fault diagnosis important before requesting replacement parts?
  • A unit’s operational constraints change, but its maintenance ranking has not been revisited. What is the most appropriate response?
  • What does AR stand for in the context of maintenance guidance?
  • Who are the most critical members of the Army maintenance system?
  • Which program is associated with oil analysis in the Army?
  • What does the instruction 'print NAME and DATE once a fault has been annotated' specify?
  • Which unit is identified as starting level of sustainment maintenance in the rear?
  • Which item is listed as a licensing prerequisite?
  • During quality control, an inspector finds that a required test was not documented. What is the best action?
  • Which approach is appropriate when updating maintenance procedures to reflect changed equipment or missions?
  • One of the CMDP purposes is to establish reporting procedures required to identify maintenance issues in order to improve conduct of maintenance and sustainment.
  • What is the primary purpose of the DA Form 5988-E?
  • SOUM stands for?
  • A company’s equipment is undergoing work at an external maintenance activity. What is the best way to keep unit leadership informed?
  • What should a scheduled equipment service generally include beyond changing fluids?
  • A readiness report indicates that equipment is fully capable, but inspection reveals an unresolved fault. What is the appropriate response?
  • Which SOP key area includes BDAR?
  • An inspection reveals that a repair exceeds the shop’s authority or capability. What should the maintenance team do?
  • What does the Logistics Management Program do in maintenance?
  • How should parts removed from unserviceable equipment be handled?
  • Who signs and dates the DA Form 5988-E after faults are verified?
  • In field maintenance, who will repair and return equipment to the operator/user?
  • Which information is most useful to provide recovery personnel before they move disabled equipment?
  • True or False: The DA Form 5988-E is used to document faults and actions for maintenance.
  • What is the T-code for the Equipment Status Report in GCSS-A?
  • A repair is requested for equipment needed for an immediate mission. What should leaders assess before deciding whether to defer scheduled maintenance?
  • Which statement about the DA 5988-E is NOT described in the material?
  • If PMCS identifies a fault that renders equipment not mission capable (NMC), the proper action is to
  • On the DA 5988-E, which role initials the limited operations entries?
  • Which action supports safe handling of hazardous maintenance waste?
  • What is controlled exchange in maintenance?
  • The Field Maintenance Company is described as which of the following relative to the Forward Support Company?
  • What should a company maintenance meeting produce in addition to synchronizing leaders, operators, maintenance personnel, and supply staff?
  • A deficiency is best defined as
  • Which statement best describes GCCS-Army in maintenance tracking?
  • What should a final maintenance inspection establish before equipment is returned to service?
  • Which statement reflects the importance of discipline in PMCS?
  • A technician plans to work under a vehicle held only by a hydraulic jack. What is the safest response?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy